If we did all things we are capable of, we would literally astound ourselves.

– Thomas A. Edison

Friday, September 26, 2008

AIPMT 2008 Question on Magnetic force

Most of you might have noted that a magnetic dipole placed in a non uniform magnetic field generally experiences a net force and a torque. If the magnetic field is uniform, the net force will be zero; but there will be a torque (if the magnetic moment vector is not parallel or antiparallel to the magnetic field direction). The following question which appeared in AIPMT 2008 question paper is worth noting:

A closed loop PQRS carrying a current is placed in a uniform magnetic field. If the magnetic forces on segments PS, SR and RQ are F1, F2 and F3 respectively and are in the same plane of the paper and along the directions shown, the force on the segment QP is

(1) √[(F3 – F1)2 + F22]

(2) √[(F3 – F1)2 – F22]

(3) F3 – F1 + F2

(4) F3 – F1 – F2

The net force on the loop in the horizontal direction is F3 – F1. Since the force F2 is in the vertical direction, the reultant of the three forces F1, F2 and F3 is √[(F3 – F1)2 + F22]. Since the net force on the entire loop must be zero in the uniform magnetic field, the force on the segment QP must be the equilibrant of √[(F3 – F1)2 + F22]. Therefore the force on the segment QP has magnitude √[(F3 – F1)2 + F22] and direction opposite [Option (1)].

Now consider a question which is a little more difficult:

A proton of charge q and mass m proceeding along the positive X-direction with speed v encounters a uniform magnetic field of flux density B directed along the negative Z-direction. If the field is confined in the region between x = 0 and x = d and the proton emerges from the field along a direction making an angle of 45º with its initial velocity, the value of d must be

(a) (1/√2)(mv/qB)

(b) √2 mv/qB

(c) mv/qB

(d) 2 mv/qB

(e) mv/2qB

The situation is shown in the adjoining figure. C is the centre of the circular path of the proton in the magnetic field and AB is the radius R drawn from the point A from which the proton exits from the field. We have

R = mv/qB which you get by equating the centripetal force mv2/R to the magnetic force qvB.

Since d = AN = R sin45º where N is the foot of the perpendicular (drawn from A) to the Y-axis, we have

D = R/√2 = (1/√2)(mv/qB)

You will find many useful questions (with solution) on magnetic force at apphysicsresources


Friday, September 12, 2008

Two Kerala Engineering & Medical Entrance 2008 Questions on Resistive Networks

Questions involving resistive networks can be solved are often found in degree entrance examinations. Here is a reasonably good question which appeared in KEAM 2008 (Engineering) question paper:

In the circuit shown, if the resistance 5 Ω develops a heat of 42 J per second, the heat developed in 2 Ω must be about (in J s–1)

(a) 25

(b) 20

(c) 30

(d) 35

(e) 40

The heat developed per second (power dissipation) in a resistance R is V2/R where V is the voltage across the resistance

[This expression has the forms I2R and VI where I is the current. Even though you can use these forms also to solve the problem, the form V2/R will be more convenient here]

Therefore we have

V2/5 = 42 watt

The power dissipated in the parallel branch containing the resistors 6 Ω and 9 Ω is V2/(6+9) = V2/15 and this must be 14 watt (since the denominator is 3 times)

The total power dissipated in the two parallel branches is thus 42+14 = 56 watt and the effective resistance of the two parallel branches is 5×15/(5+15) = 75/20 Ω.

If I is the current passing through the 2 Ω resistance, we have

I2×2 = W where W is the power dissipated in 2 Ω.

Since the same current passes through the effective resistance (75/20 Ω) of the parallel branches, we have

I2×75/20 = 56

From the above equations (on dividing),

40/75 = W/56 so that W = 40×56/75 = 30 watt nearly

The following MCQ which appeared in KEAM 2008 (Medical) question paper is simple:

In the Wheatstone’s network shown in the figure, the current I in the circuit is

(a) 1 A

(b) 2A

(c) 0.25 A

(d) 0.5 A

(e) 0.33 A

The bridge is balanced (since 2 Ω/4 Ω = 4 Ω/8 Ω). Therefore, the points B and D are equipotential points and there is no current through the diagonal 5 Ω resistor. The circuit thus reduces to 6 Ω and 12 Ω in parallel with the 2 V battery. The parallel combined value of 6 Ω and 12 Ω is 6×12/(6+12) = 4 Ω.

The current, I =2 V/4 Ω = 0.5 A.

Saturday, August 30, 2008

IIT-JEE 2008 Matrix-Match type Question----

After the change of pattern with effect from the 2007 exam, the degree of difficulty of IIT-JEE has been considerably reduced, as you can judge from the following Matrix-Match Type question which appeared in the 2008 question paper:

Column I gives a list of possible set of parameters measured in some experiments The variations of the parameters in the form of graphs are shown in Column II. Match the set of parameters given in column I with the graphs given in column II. Indicate your answer by darkening the appropriate bubbles of the 4×4 matrix given in the ORS.

--------------------------Column I-----------------------------------------Column II----
(A) Potential energy of a simple pendulum (y-axis) as a function of displacement (x-axis)

(B) Displacement (y-axis) as a function of time (x-axis) for a one dimensional motion at zero or constant acceleration when the body is moving along the positive x-direction

(C) Range of a projectile (y-axis) as a function of its velocity (x-axis) when projected at a fixed angle

(D) The square of the time period (y-axis) of a simple pendulum as a function of its length (x-axis)



(A) is to be matched with (p) since the potential energy (U) of a simple pendulum is given by

U = mgh = mgℓ(1– cosθ).

Here h is the height of the bob with respect to the mean position of the bob, ℓ is the length of the pendulum and θ is the angular displacement. U is thus related to θ non-linearly as indicated in the graph (p).

(B) is to be matched with (q) and (s). When the acceleration is zero, the velocity is constant and the displacement is directly proportional to the time as indicated in the graph (q). When the acceleration is constant, the velocity is directly proportional to the time and the displacement is non-linearly related to the time as indicated in the graph (s). [Remember s = ut + ½ at2].

(C) is to be matched with (s) since the range R of a projectile is given by

R = (u2sin2θ)/g where u is the velocity of projection and θ is the angle of projection. For fixed angle of projection, the range is directly proportional to the square of the velocity of projection as indicated in graph (s).

(D) is to be matched with (q) since the time period of a simple pendulum is given by

T = 2π√(ℓ/g) so that the square of the time period T is directly proportional to the length ℓ of the pendulum as indicated in graph (q).

You will have to darken the bubbles of the 4×4 matrix as shown

You can find more IIT-JEE questions (with solution) here and at other locations at physicsplus.blogspot.com

Monday, August 11, 2008

Simple Kinematics in One Dimension – AIEEE 2008 & other questions

The following question which appeared in AIEEE 2008 question paper is an interesting one. You will find that you can work it out without the knowledge of any standard formula. In fact sheer imagination is sufficient to answer this question and that’s why it is interesting. Here is the question:

A body is at rest at x = 0. At t = 0, it starts moving in the positive x-direction with a constant acceleration. At the same instant another body passes through x = 0 moving in the positive x-direction with a constant speed. The position of the first body is given by x1(t) after time 't' and that of second body by x2(t) after the same time interval. Which of the following graphs correctly describes (x1 – x2) as a function of time ‘t’?

(x1 – x2) must be negative in the initial stage since the first body starts from rest where as the second body has a constant speed through out its motion. The first body will be behind the second one and the separation between them will increase for some time. As the first body picks up speed, the separation between the bodies decreases and becomes zero at a certain instant. The separation (x1 – x2) will be negative up to this instant. Thereafter the first body overtakes the second one and the separation (x1 – x2) becomes positive and goes on increasing. The situation is indicated correctly by graph (1).

Alternatively, you can find the answer by applying the equation,

s = ut + (1/2)at2 for uniformly accelerated one dimensional motion.

Thus x1 = 0 + (1/2)at2 and x2 = vt where a is the constant acceleration of the first body and v is the constant speed of the second body.

Therefore, (x1 – x2) = (1/2)at2 – vt

(x1 – x2) = 0 when t = 0 and when t = 2v/a.

Further, d(x1 – x2)/dt = at – v so that at t = v/a the quantity (x1 – x2) will be a maximum or minimum. It is in fact a minimum point on the curve obtained by plotting (x1 – x2) against t, as shown by the positive value of the second differential coefficient, d2(x1 – x2)/dt2.

So the correct option is indeed curve (1).

Here is another question:

A particle starts from rest with a constant acceleration and moves along the positive x-direction. If its displacement is x1 in the first two seconds and x2 in the next two seconds, then

(a) x2 = 2x1

(b) x2 = 3x1

(c) x2 = 4x1

(d) x2 = 5x1

(e) x2 = 6x1

We have x1 = (1/2) a×22 = 2a

x2 = (1/2) a×42 – (1/2) a×22 = 6a

Therefore, x2 = 3x1

Now, consider the following question which is quite simple. But be careful while answering.

A train having a constant speed of 54 km/hour takes 10 seconds to move past a lamp post. How much time is required for this train to cross a 300 m long bridge?

(a) 18 s

(b) 20 s

(c) 30 s

(d) 36 s

(e) 40 s

The speed of the train in ms–1 is 54×5/18 = 15.

Since the train takes 10 s to move past the lamp post, the length of the train is 15×10 = 150 m.

The train has to travel a total distance of 450 m to cross the bridge. (This includes the length of the train also).

Therefore, time required = 450/15 = 30 s.

The following question appeared in AIPMT 2008 question paper:

A particle moves in a straight line with a constant acceleration. It changes its velocity from 10 ms–1 to 20 ms–1 while passing through a distance 135 m in t second. The value of t is

(1) 1.8

(2) 12

(3) 9

(4) 10

We have vt 2 = v0 2 + 2as with usual notations.

Therefore, 202 = 102 + 2a×135 from which a = 30/27

Substituting this value of acceleration a in the equation

vt = v0 + at

we have 20 = 10 + (30/27)t from which t = 9 second

You will find some useful posts on one dimensional motion at physicsplus

Thursday, July 31, 2008

Kerala Engineering Architecture Medical (KEAM) 2008 Entrance Examination Questions on Digital Circuits

As usual, simple questions were asked from the section on digital circuits in KEAM 2008 Examination. Here is the question which appeared in the Engineering Entrance question paper:

The combination of the following gates produces

(a) AND gate

(b) NAND gate

(c) NOR gate

(d) OR gate

(e) NOT gate

The first gate is a NAND gate. The second gate also is a NAND gate. But it functions as a NOT gate since its inputs are shorted. So we have a NAND followed by a NOT and hence the combination functions as an AND gate.

Here is the question which appeared in the Kerala Medical Entrance (2008) question paper:

The output Y when all the three inputs are first high and then low, will respectively be

(a) 1, 0

(b) 1, 1

(c) 0, 0

(d) 0, 1

(e) 1, –1

When all the three inputs are high the NAND gate following the AND gate has both inputs at high level. The output Y of the NAND is therefore low. When all the three inputs are low the NAND gate has both inputs low and hence the output is high. The correct option is (d).

You will find AIEEE 2008 and AIPMT 2008 questions on digital circuits with solution here.