If we did all things we are capable of, we would literally astound ourselves.

– Thomas A. Edison

Showing posts with label electricity. Show all posts
Showing posts with label electricity. Show all posts

Tuesday, December 02, 2008

Two AIPMT 2008 Questions (MCQ) from Current Electricity

Some of you may understand the principles in physics very well but your capacity for numerical manipulations may be poor. Practice can make you strong in solving questions involving numerical manipulations so that you will not waste your precious time on such questions. Here are two questions which appeared in AIPMT 2008 question paper:

(1) An electric kettle takes 4 A current at 220 V. How much time will it take to boil 1 kg of water from temperature 20º C? The temperature of boiling water is 100º C.

(1) 8.4 min

(2) 12.6 min

(3) 4.2 min

(4) 6.3 min

We have VIt =mcθ where V is the voltage, I is the current, t is the time of flow of the current, m c is the specific heat of water (which is approximately 4200 Jkg–1 K–1) and θ is the temperature rise. is the mass of water,

Therefore, 220×4×t = 1×4200×(100 – 20)

This will give t = 381 sec. (nearly) which is approximately 6.3 min.

(2) a galvanometer of resistance 50 Ω is connected to a battery of 3 V along with a resistance of 2950 Ω in series. A full scale deflection of 30 divisions is obtained in the galvanometer. In order to reduce this deflection to 20 divisions, the resistance in series should be

(1) 5550 Ω

(2) 6050 Ω

(3) 4450 Ω

(4) 5050 Ω

Since the current through an ordinary galvanometer is directly proportional to the deflection (remember that in a tangent galvanometer this is not the case) we have

3/(50+2950) = k×30 when the deflection is 30 divisions.

Here k is the proportionality constant (figure of merit of the galvanometer).

If the resistance in series for reducing the deflection to 20 divisions is X we have

3/(50+X) = k×20

On dividing the first equation by the second,

(50+X)/3000 = 3/2 from which X = 4450 Ω.

Wednesday, February 20, 2008

Electrostatics: Two Questions (MCQ) on Sharing of Charge

(1) Three identical conducting spheres X, Y and Z carrying charges 8 μC, – 4.8 μC and 6.4 μC respectively are kept in contact and then separated from one another. Then, the sphere Y will have approximately

(a) an excess of 3×1013 electrons

(b) a deficiency of 3×1013 electrons

(c) a deficiency of 6×1013 electrons

(d) an excess of 6×1013 electrons

(e) a deficiency of 2×1013 electrons

The total charge on the spheres is (8 – 4.8 + 6.4) μC = 9.6 μC. Since the spheres are identical, they have the same capacitance and the charge is shared equally by them. Therefore, the charge on each sphere is 3.2 μC.

Since the charge on the sphere Y (and the spheres X and Z) is positive, there will be a deficiency of electrons.

Remembering that the electronic charge is 1.6×10–19 coulomb, the deficiency of electrons on the sphere is 3.2×10–6/1.6×10–19 = 2×1013. Therefore the correct option is (e).

(2) Two capacitors C1 and C2 of capacitance 2 μF and 3 μF are charged to 50 volt and 40 volt respectively and arranged as shown, with the key K open. On closing the key, the charge flowing through the key will be

(a) 8 μC

(b) 12 μC

(c) 32 μC

(d) 64 μC

(e) 132 μC

You must remember that the total charge is conserved in all situations. In the above question, the total charge is C1V1 + C2V2 = 100 μC + 120 μC = 220 μC.

When the key K is closed, the capacitors get connected in parallel and the common potential difference between their terminals will be

V = (C1V1 + C2V2)/(C1 + C2) = 220 μC/ 5 μF = 44 volt.

The charge on C1 after closing the key will be C1V = 88 μC.

Since the initial charge on C1 is 100 μC, the charge flowing through the key must be (100–88) μC = 12 μC.

[You will obtain the same result on considering C2].

Friday, November 16, 2007

IIT-JEE Matrix Match Type Question on Electromagnetism

The following Matrix Match type question which appeared in the IIT-JEE 2007 question paper aims at checking your understanding of basic principles of electricity and magnetism. Here is the question:

Column I gives certain situations in which a straight metallic wire of resistance R is used and Column II gives some resulting effects. Match the statements in Column I with the statements in Column II and indicate your answer by darkening appropriate bubbles in the 4×4 matrix given in the OR

Column I------------------------------ Column II

(A) A charged capacitor is---------------(p) A constant current flows

connected to the ends of---------------- through the wire

the wire

(B) The wire is moved -----------------(q) Thermal energy is generated

perpendicular to its length with -------- in the wire

a constant velocity in a uniform

magnetic field perpendicular to

the plane of motion

(C) The wire is placed in a constant ---(r) A constant potential

electric field that has a direction ------difference develops between

along the length of the wire-----------the ends of the wire

(D) A battery of constant emf is ------(s) Charges of constant

connected to the ends of the----------magnitude appear at the ends

wire ---------------------------------of the wire
(A) When a charged capacitor is connected to the ends of a wire, a discharge current flows through the wire and the wire is heated. This is given in statement (q) under column II so that (A) is to be matched with (q).

(B) When the wire is moved perpendicular to the magnetic field, free electrons in the wire experience a magnetic (Lorentz) force and shift towards one end. Consequently, a potential difference develops between the ends of the wire. Since the wire is moving with constant velocity in a constant magnetic field, the charges developed at the ends as well as the potential difference between the ends are constant. Therefore, (B) is to be matched with (r) and (s).

(C) When the wire is placed in the electric field, free electrons shift towards the end of the wire which is at higher potential. This shifting of free electrons results in the accumulation of charges at the ends of the wire. But there is no potential difference between the ends of the wire since the shifting of free electrons just nullifies the potential difference caused by the external electric field. Therefore, (C) is to be matched with (s) only.

(D) When a battery of constant emf is connected to the ends of the wire, the effects given at (p) (q) and (r) under Column II occur. Therefore, (D) is to be matched with (p), (q) and (r).

These are to be marked in the 4×4 matrix as shown: