If we did all things we are capable of, we would literally astound ourselves.

– Thomas A. Edison

Showing posts with label optics. Show all posts
Showing posts with label optics. Show all posts

Monday, October 18, 2010

Multiple Choice Questions on Lenses


-->
Here are a few questions from optics involving the lens maker’s equation and the concept of magnification in the case of lenses:
(1) A biconvex lens has the same radius of curvature R for its faces. If the focal length of the lens in air is R/2, the refractive index of the material of the lens is
(a) 1.2
(b) 1.33
(c) √2
(d) √3
(e) 2
The refractive index n is related to the focal length f and the radii of curvature R1 and R2 by the lens maker’s equation,
1/f = (n – 1) (1/R1 – 1/R2)
By Cartesian sign convention, R1 is positive and R2 is negative for a biconvex lens so that the above equation becomes
1/f = (n – 1) (1/R1 + 1/R2)
Substituting for f, R1 and R2 we obtain
1/(R/2) = (n – 1) (2/R)
Or, 2/R = (n – 1) (2/R) from which n = 2
(2) A biconvex lens has the same radius of curvature R for its faces. If the focal length of the lens in air is R, what will be its focal length in a liquid of refractive index 1.5?
(a) R/2
(b) R
(c) 2R
(d) 4R
(e) Infinite
Many of you might have noted that an equiconvex lens of refractive index 1.5 has focal length equal in magnitude to the radius of its faces.
Some of you might have noted the converse of the above fact: If the refractive index is 1.5 in the case of an equiconvex (or equiconcave) lens, the magnitude of its focal length will be the same as that of the radius of curvature of its faces
[You can check this by substituting n = 1.5 and R1 = R2 = R in the lens maker’s equation].
Since the refractive index of the material of the lens is 1.5, its focal length in a liquid of refractive index 1.5 will be infinite.
(3) A converging lens produces a real, magnified and well defined image of a small illuminated square on a screen. The area of the image is A1. When the lens is moved towards the screen without disturbing the object and the screen, the area of the well defined image obtained on the screen is A2. What is the side of the square object?
(a) (√A1 + √A2)/2
(b) [(A1 + A2)/2]1/2
(c) (A1A2)1/2
(d) (A1A2)1/4
(e) [√A1 +√A2]1/4
The two positions (of the lens) for which well defined images of the square are obtained, are the conjugate positions and hence we have
a =√(a1a2) where a1 and a2 are the sides of the images in the two cases and a is the side of the square object.
[The linear magnification in the first case is v/u = a1/a.
Since the object distance u and the image distance v are interchanged in conjugate positions, we have, in the second case,
u/v = a2/a.
From the above expressions, 1 = a1a2/a2 from which a =√(a1a2)].
But a1 = √A1 and a2 = √A2
Therefore, a =√(√A1√A2) = (A1A2)1/4
You will find similar useful multiple choice questions on optics here as well as here.

Friday, January 22, 2010

Karnataka Common Entrance Test (CET) 2006 Questions on Interference and Diffraction of Waves

The following three questions appeared in Karnataka CET 2006 question paper:

(1) When a low flying aircraft passes overhead, we sometimes notice a slight shaking of the picture on our TV screen. This is due to

(1) diffraction of signal received from the antenna

(2) interference of the direct signal received by the antenna with the weak signal reflected by the passing aircraft

(3) change of magnetic flux occurring due to the passing aircraft

(4) vibrations created by the passing aircraft.

The microwaves reaching the antenna directly and after reflection at the aircraft interfere. The interference pattern produced is unstable since the aircraft is moving. This results in a shaking picture [Option (2)].

(2) A beam of light of wave length 600 nm from a distant source falls on a single slit 1 mm wide and the resulting diffraction pattern is observed on a screen 2 m away. The distance between the first dark fringes on either side of the central bright fringe is

(1) 1.2 cm

(2) 1.2 mm

(3) 2.4 cm

(4) 2.4 mm

This is a popular question repeatedly asked in various entrance tests with changes in numerical values.

The diffraction bands are distributed symmetrically on either side of the central maximum and the angular separation of the centre of the first dark fringe from the centre of the central maximum is λ/a where λ is the wave length of light and a is width of the slit.

Therefore, the angular separation between the first dark fringes on either side of the central bright fringe is 2λ/a.

The distance (linear separation) between the first dark fringes on either side of the central bright fringe is D×2λ/a where D is the distance between the slit and the screen and we have

D×2λ/a = 2×(2×600×10–9/10–3) = 2.4×10–3 m = 2.4 mm.

(3) If white light is used in the Newton’s ring experiment, the colour observed in the reflected light is complementary to that observed in the transmitted light through the same point. This is due to

(1) 90º change of phase in one of the reflected waves

(2) 180º change of phase in one of the reflected waves

(3) 145º change of phase in one of the reflected waves

(4) 45º change of phase in one of the reflected waves

The mechanism of formation of Newton’s rings is the same as that of the production of colours in thin films and is shown in the figure. Usually the light beam falls normally on the air film included between the upper lens and the lower glass plate, but we have shown the rays slanting to make things clear.

Newton’s rings in the reflected system are formed by the interference of waves 1 and 2 (fig.) where as Newton’s rings in the transmitted system are formed by the interference of waves 3 and 4.

If the phase change of π introduced due to reflection at a denser medium is ignored, the difference between the path lengths of the rays 1 and 2 is the same as the difference between the path lengths of the rays 3 and 4.

In the case of waves 1 and 2 there is an additional path difference of λ/2 because of the phase difference π introduced due to reflection at B. In the case of waves 3 and 4 there is an additional path difference of λ because of the phase difference 2π introduced due to reflections at B and C. If the condition for brightness is satisfied for one colour in the case of the interfering waves in the reflected system, the condition for darkness will be satisfied for the same colour in the case of the interfering waves in the transmitted system. So the colours present in the reflected system will be absent in the transmitted system and vice versa. The basic reason for this is the 180º phase change [Option (2)].

You will find a useful post in this section at physicsplus.

Tuesday, June 09, 2009

Kerala Medical Entrance (KEAM) 2009 Questions on Optics

Physics questions in the Kerala Medical Entrance 2009 question paper were generally simple compared to those in the Kerala Engineering Entrance 2009 question paper. Today we will discuss the questions on optics included in the Medical Entrance question paper. Here are those three questions:

(1) A ray of light suffers minimum deviation in equilateral prism P. Additional prisms Q and R of identical shape and of same material as that of P are now combined as shown in figure. The ray will now suffer

(a) greater deviation

(b) no deviation

(c) same deviation as before

(d) total internal reflection

(e) smaller deviation

On combining additional prisms Q and R with P, we obtain a portion of an equilateral prism of the same material. Since the incident ray is such that the deviation produced by the prism P is minimum, the refracted ray will be parallel to the base of the prism P and hence it will pass parallel to the base of the combined prism, suffering the same deviation (minimum deviation) as before. The correct option is (c).

(2) When light is scattered by atmospheric atoms and molecules, the amount of scattering of light of wave length 440 nm is A. The amount of scattering for light of wave length 660 nm is

(a) (4/9) A

(b) 2.25 A

(c) 1.5 A

(d) 0.66 A

(e) A/5

The answer for this question is based on Rayleigh’s scattering formula which says that the amount of light scattered is inversely proportional to the fourth power of the wave length of light. Therefore, in the two cases we have respectively,

A α 1/4404 and

x α 1/6604 where x is the amount of scattering for light of wave length 660 nm.

Dividing, A/x = 6604/ 4404 = (3/2)4 = 81/16 = 5 nearly.

Therefore, x = A/5.

(3) In the measurement of the angle of a prism using a spectrometer, the reading of first reflected image are Vernier I: 320° 40' Vernier II: 140° 30' and those of the second reflected image are Vernier I: 80° 38'; Vernier II: 260° 24'. Then the angle of the prism is

(a) 59° 58'

(b) 59° 56'

(c) 60° 2'

(d) 60° 4'

(e) 60° 0'

When a parallel beam of light falls symmetrically on the two faces of the prism, the angle between the rays reflected from these faces is 2A where A is the angle of the prism. If you have a clear understanding of the experimental determination of the angle of the prism using this method, you will definitely be able to find the answer to the above question since you will know that the reading of Vernier I was first inecreased from 320° 40' to 360° on rotating the telescope to view the reflected image from the second face. The 360° mark is the same as 0° mark. So after reaching the zero reading the telescope has rotated through 80° 38'.

The difference between Vernier I readings is (360° - 320° 40') + 80° 38' = 39° 20'+ 80°' = 119° 58'. 38

The difference between Vernier II readings is 260° 24' - 140° 30' = 119° 54'.

The mean of the difference between the readings is 119° 56'.

Therefore, the angle of the prism is (119° 56')/2 = 59° 58'

Monday, March 05, 2007

Optics-Questions on Interference

The following MCQ appeared in Kerala Engineering Entrance 2005 test paper:

In the Young’s double slit experiment, the intensity of the central maximum is observed to be I0. If one of the slits is covered, the intensity at the central maximum will become

(a) I0/2 (b) I0/√2 (c) I0/4 (d) I0 (e) I02

If the resultant amplitude (due to the two interfering waves) at the central maximum is ‘a’. we can write

I0 α a2, since the intensity is proportional to the square of the amplitude.

When one of the slits is covered, the amplitude is reduced to a/2. If ‘I’ is the intensity at the position of the central maximum now, we can write

I α (a/2)2.

From the above, we obtain I = I0/4 [Option (c)].

Now, consider the following question:

In a double slit interference pattern, the intensity at the centre of a bright fringe is I. The intensity at a point one quarter of the distance to the next bright fringe is

(a) I/2 (b) I/4 (c) I/8 (d) I (a) zero

At the centre of a bright fringe the waves arrive in phase. You may imagine that the photons starting from the two slits are in the same state of vibration when they reach the position of the centre of a bright fringe and that is why their amplitudes get added to produce maximum intensity. At the centre of the next bright fringe, the photons will have an extra phase difference of 2π, but this too is ‘in phase’ condition (for the same state of vibration).

At a point one quarter of the distance to the next bright fringe, the phase difference between the interfering photons will be 2π/4 = π/2.

If ‘a’ is the amplitude of each interfering wave, the resultant amplitude at the centre of a bright fringe is 2a and the intensity I is given by

I α 4a2

At a point one quarter of the distance to the next bright fringe, the amplitudes are added with a phase difference of π/2 and the resultant amplitude is √(a2 + a2) = √2 a. The intensity (I') in this case is given by

I' α 2a2

From the above expressions, we obtain I' = I/2 [Option (a)].

[Note that the intensity (I) produced by two interfering waves of the same amplitude ‘a’ is given by I α 4a2cos2(δ/2) where ‘δ’ is the phase difference].

You will find more multiple choice questions with solution in this section at physicsplus: Multiple Choice Questions on Wave Optics and at physicsplus: Questions on Polarisation

Sunday, February 11, 2007

Two Questions (MCQ) on Telescopes

nvppfThe following question appeared in MPPMT 2000 question paper:
The diameter of the objective of a telescope is ‘a’, its magnifying power is ‘m’ and the wave length of light is λ. The resolving power of the telescope is
(a) a/1.22 λ (b) λm/1.22a (c) 1.22a/ λ (d) a/1.22 λm
The magnifying power given in the problem is just a distraction. The limit of resolution of a telescope, which is the minimum angular separation between two objects that can be resolved is given by dθ = 1.22λ/a. The resolving power is the reciprocal of the limit of resolution and is equal to a/1.22 λ. [Option (a)].
Objectives and eye pieces of telescopes are made of achromatic combination of lenses to make them devoid of the defect of chromatic aberration. Consider the following MCQ:
A telescope objective is an achromatic doublet made of crown glass and flint glass lenses. The proper choice for the achromatic combination is
(a) divergent lens of flint glass and convergent lens of crown glass
(b) convergent lens of flint glass and divergent lens of crown glass
(c) both convergent (d) both divergent
(e) as given in options (a) or (b) or (c)
You might be remembering the condition for an achromatic doublet: ω1 /f1+ ω2/f2 = 0, from which ω1/f1= – ω2/f2.
Since the dispersive power ‘ω’ is a positive quantity, the negative sign shows that one lens must be diverging (negative focal length) and the other converging. In a telescope, the objective has to be converging. Therefore, the converging lens should have smaller focal length (larger power) so that when combined with the diverging lens, the combination will still be converging. Crown glass has smaller dispersive power and hence the converging lens should be made of crown glass to satisfy the above condition of achromatism [Option (a)].

Saturday, September 09, 2006

Optics - Questions on Reflection and Refraction

The average student is usually scared of questions in ray optics because of the wrong notion that the sign convention is some thing that adds to one’s confusion! The best thing to do is to work out as many questions as possible. You will definitely realize that there is nothing to worry about. Let us discuss the following questions:
(1) A glass slab of refractive index 1.5 and thickness 4.5cm is kept close to a concave mirror of focal length 20cm so that the face of the slab is perpendicular to the principal axis of the mirror. A point object is placed on the principal axis so that its image coincides with itself. Then, the distance of the object from the mirror is
(a) 40cm (b) 41.5cm (c) 43cm (d) 37cm (e) 47.5cm
If the glass slab is not interposed, the object is to be placed at the center of curvature of the mirror (at 40cm). When the glass slab is present, the distance of the object is to be increased by the apparent shift t - (t/μ) produced by the slab, so that the ray emerging from the slab appears to come from the center of curvature of the mirror.
Therefore, distance of the object = 40+ 4.5 – (4. 5/1. 5) = 41.5cm [option (b)].
(2) A glass sphere of radius 2cm and refractive index 1.5 has a small air bubble at a distance of 1.2cm from the surface through which it is viewed normally. Its apparent distance from the surface is
(a) 0.8cm (b) 1cm (c) 1.33cm (d) 1.6cm (e) 2.4cm

Don’t be tempted to pick out option (a), under the impression that this is similar to the normal refraction at a glass slab. You have to use the equation, μ2/v - μ1/u = (μ2- μ1)/R where μ2= 1, μ1= 1.5, R = -2cm and u = -1.2cm.
Note that we have imagined the ray from the object (air bubble) to be proceeding in the positive X-direction so that the object distance measured from the pole (which is imagined to be at the origin) to the object is negative. The radius of curvature of the spherical surface also is negative since we have to measure it from this pole to the centre of curvature. We leave the unknown quantity ‘v’ in the equation as it is, with out worrying about its sign.
Substituting these values, v = -1cm. The negative sign shows that the image, which is virtual, is on the same side of the refracting surface as the object is.
(3)An astronomical telescope has an eye piece of focal length 10cm. It gives a magnification of 20 in normal adjustment. The distance between the objective and the eye piece is
(a) 30cm (b) 60cm (c) 110cm (d) 200cm

In normal adjustment, magnification, m = fo/fe where fo and fe are the focal lengths of the objective and eye piece respectively. Therefore, fo = m.fe = 20´10 = 200cm.
Distance between objective and eye piece = fo + fe = 200+10 = 210cm.
(4) The plane faces of two identical plano-convex lenses each having a focal length of 50cm are placed against each other to form a usual biconvex lens. The distance from this lens combination at which an object must be placed to obtain a real, inverted image which has the same size as the object is
(a) 50cm (b) 25cm (c) 100cm (d) 40cm (e) 125cm
This simple question appeared in Kerala Engineering Entrance test paper of 2006. When two identical lenses are kept in contact, the focal length of the combination is reduced to half the value of each lens. (This is true even if the plane surface of one plano-convex lens is placed in contact with the curved surface of the other). The focal length of the combination therefore is 25cm.
A converging lens will produce a real, inverted image of the same size as the object when the object distance is 2f. So, the answer is 50cm.
You will find more multiple choice questions (with solution) from Optics here as well as at physicsplus: Questions (MCQ) on Refraction at Spherical Surfaces

Tuesday, August 22, 2006

Questions from Optics- Cartesian Sign Convention

The sign convention adopted widely in Optics is the Cartesian convention. The ray incident on the curved surface is to be considered as proceeding in the positive X-direction and you have to measure all distances from the pole, which is supposed to be the origin.
Occasionally, you may be given a ray diagram in which the incident ray may be proceeding from right to left. To avoid confusion, imagine that the direction of the incident ray is still in the positive X-direction. You can even redraw the diagram to make the incident ray proceed from left to right if you want. The signs given to the distances are as in the Cartesian coordinate system: pole to right positive and pole to left negative. Distances measured (from pole) upwards are positive and those measured downwards are negative but you will mostly encounter problems with leftward and rightward measurements.
While solving problems, you should apply the signs to all known quantities. The unknown quantities are left as they are in the formulae. You will be able to arrive at conclusions by interpreting the sign of the unknown quantity you finally arrive at as the answer. For instance, if the distance of an image is obtained as negative, you will immediately understand that the image is on the same side of the curved surface as the object is.
Let us consider the following M.C.Q.:
A convex lens made of crown glass of refractive index 1.5 has focal length 20 cm. What will be its focal length within water (refractive index 4/3)?
(a) 10 cm (b) 20 cm (c) 40 cm (d) 60 cm (e) 80 cm
Writing lens maker’s equation 1/f = [(μ2/μ1) -1] [(1/R1) - (1/R2)] for the two cases, we have,
1/20 = [1.5-1] [(1/R1) - (1/R2)] for the first case, where f = +20cm (for convex lens), μ2 = 1.5 and μ1 = 1 (for air) and
1/f = [1.125 – 1] [(1/R1)-(1/R2)] for the second case where μ2= 1.5 and μ1 = 4/3 (for water).
Note that we have ignored the signs of the unknown quantities f, R1 and R2. On dividing the first equation by the second, we obtain f = 80 cm[option (e)].
The result shows that within water, the lens is still a converging lens. If the liquid has refractive index more than that of the lens, the lens will become diverging within the liquid. Let us consider such a case:
A converging lens of focal length 20cm is made of glass of refractive index 1.5. How will this lens behave if it is immersed in a liquid of refractive index 1.6?
(a) As a converging lens of focal length 80cm (b) As a diverging lens of focal length 80cm (c) As a diverging lens of focal length 120cm (d) As a diverging lens of focal length 160cm (e) As a converging lens of focal length 120cm
The correct option to this question is (d). You can check this by writing the lens maker’s equation for the two cases as in the previous question. The first equation is unchanged: 1/20 = [1.5-1] [(1/R) - (1/R2)]. The second equation is
1/f = [0.9375 – 1] [(1/R1) - (1/R2)] since μ2/μ1) = 1.5/1.6 = 0.9375.
Dividing the first equation by the second, we obtain f = -160cm. As we get a negative value for the focal length, the lens behaves as a diverging lens within the given liquid [option (d)].
Let us discuss one more question:
The plane face of a planoconvex lens is silvered. If the refractive index of the material of the lens is μ, and the radius of curvature of its curved face is R, then the system behaves like a concave mirror of radius of curvature
(a) Rμ (b) R/μ (c) R/ (μ-1) (d) R/2(μ-1) (e) R(μ-1)
When one surface of a lens is silvered, the rays of light entering through the un-silvered surface are refracted first, reflected by the silvered surface next and finally are once more refracted. The effective focal length (F) of the system is given by
1/F = 1/f + 1/fm + 1/f where ‘f’ is the focal length of the un-silvered lens and fm is the focal length of the silvered surface which makes a mirror. In the present problem since the silvered surface is plane, fm is infinity so that the above equation becomes
1/F = 1/f + 0 + 1/f = 2/f. Therefore, F = f/2.
But we have for the original un-silvered lens, 1/f = (μ – 1) [(1/R1) - (1/R2)] where R1 = R and R2 = infinity. Therefore, f = R/(μ – 1)
Since F = f/2, the system has a focal length of R/2(μ – 1).The radius of curvature of a concave mirror is twice its focal length. Therefore, the system behaves like a concave mirror of radius of curvature R/(μ – 1). [Option (c)]. You will find multiple choice questions (with solution) on refraction at plane surfaces here as well as here